THEORETICAL AND PRACTICAL FOUNDATIONS OF IMPROVING THE UCHDM SEED DELINTERING MACHINE
PDF
DOI

Keywords

delinter, cottonseed delinting, chamber, saw–metal brush, combined cylinder, force, factor.

How to Cite

THEORETICAL AND PRACTICAL FOUNDATIONS OF IMPROVING THE UCHDM SEED DELINTERING MACHINE. (2026). Journal of Universal Science Research, 4(4), 59-69. https://universalpublishings.com/~niverta1/index.php/jusr/article/view/17707

Abstract

The article presents the results of theoretical and practical experiments on the improvement of the seed delinter. The upper chambers of the existing seed delinter are multi-faceted, and the use of combined saw-metal brush cylinders in them allows the extraction of fluff instead of fluff from dehaired seeds, and a technical solution for its implementation has been developed. It was determined that if the short fibers scraped off in the upper chamber of the delinter move along the surface of the combined saw-metal brush cylinder, the fibers in such a mass will remain on the surface of the combined saw-metal brush cylinder, and if they do not, such short fibers will separate from the surface of the combined saw-metal brush cylinder and turn into free fibers. In the conducted multi-factor experiments, the optimal parameters of the delinter were obtained.

PDF
DOI

References

[1] Patent for Utility Model. Delinter. No. FAP 01690. Registered 18.08.2021.

[2] Delinter. Utility Model Patent. FAP No. 00843, 17.09.2013. Kushakeev B.Ya., Rakipov V.G., Gulyaev R.A., Jamalov R.K., Nazirov R.R.

[3] Report of the Institute of Electronics of the Academy of Sciences of the Republic of Uzbekistan under Contract No. 1-IE-02 “Development of a Combined Delinting Device for Cotton Planting Seeds,” Tashkent, 2002.

[4] V.G. Rakipov, R.K. Jamalov, et al. Improving the Delinting Technology in Modernized Seed Cotton Preparation Workshops. Research Topic 0908. Paxtasanoat Scientific Center JSC, Tashkent, 2009, 26 p.

[5] O. Abdurakhmonov, A. Akramov. Theoretical and Experimental Analysis of the Delinting Process in the UChDM Machine under the Action of Saw–Metal Brush Cylinders. Uzbekistan Textile Journal, Tashkent Institute of Textile and Light Industry, No. 1, 2023, pp. 13–20.

[6] Panovko Ya.G. Fundamentals of the Applied Theory of Vibrations and Impact. Mashinostroenie Publishing, Moscow, 1976. 320 p.

[7] T.R. Rashidov, Sh. Shoziyo¬tov, Q.B. Muminov. Fundamentals of Theoretical Mechanics. Tashkent: O‘qituvchi, 1990, pp. 497–504.

[8] Zubov Yu.A. Short Course in Dynamics. Moscow: Fizmatlit, 2003.

[9] Yudin M.I. Planning an Experiment and Processing Its Results: Monograph. Krasnodar: KGAU, 2004. 239 p.

[10] Nosirov Fakhriddin, Juraev Abdurasul, Karabaev Ibragim, Kerimzatov Nurmukhammed. Economic Calculation of a Photoelectric Station for Degradation Processes. https://pubs.aip.org/aip/acp/article-abstract/2552/1/050035/2875775/ Economic-calculation-of-a-photoelectric-station?redirected From=fulltext

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

Downloads

Download data is not yet available.