CREATING AN ADDITIONAL DEVICE TO ACCELERATE THE  OUTPUT OF SEED FROM THE WORKING CHAMBER OF THE 5DP-130  SAW

H. E. Turdiyev; I. Tursunaliyev; B.Umarjonov

Vol. 2 No. 4 (2024), Articles

Vol. 2 No. 4 (2024)

CREATING AN ADDITIONAL DEVICE TO ACCELERATE THE OUTPUT OF SEED FROM THE WORKING CHAMBER OF THE 5DP-130 SAW

Articles

Published 2024-04-08

H. E. Turdiyev⁺⁻
I. Tursunaliyev⁺⁻
B.Umarjonov⁺⁻

H. E. Turdiyev

Lecturer, Fergana Polytechnic Institute, Fergana, Uzbekistan

I. Tursunaliyev

Student, Fergana Polytechnic Institute, Fergana, Uzbekistan

B.Umarjonov

Student, Fergana Polytechnic Institute, Fergana, Uzbekistan

PDF

DOI

Keywords

raw materials, seed, density, seed comb, gin, 5DP-130

How to Cite

CREATING AN ADDITIONAL DEVICE TO ACCELERATE THE OUTPUT OF SEED FROM THE WORKING CHAMBER OF THE 5DP-130 SAW. (2024). Journal of Science-Innovative Research in Uzbekistan, 2(4), 165-169. https://universalpublishings.com/index.php/jsiru/article/view/5115

Abstract

This study aims to improve the efficiency of seed output from the working chamber of the 5DP-130 saw by designing and implementing an auxiliary acceleration device. Efficient seed extraction is critical for agricultural productivity, and this project seeks to optimize the process by augmenting the saw with an additional mechanism. Through careful consideration of design factors such as mechanism selection, integration with the saw, compatibility with different seed types, and efficiency and safety measures, the goal is to enhance overall operational efficiency and throughput. This research contributes to advancements in agricultural processing technology, offering a practical solution to streamline seed extraction in the 5DP-130 saw. In this article, we made changes to the seed comb of the 5DP-130 chainsaw genie. In this case, we can increase the productivity of the gin equipment and seed output to a certain extent, and it also allows us to control the density of raw materials

PDF

DOI

References

M.A. Babadjanov. "Technological process design". Textbook. T.:, Cholpon, 2009. 182 pages.

E Zikriyoyev E.Z. (2002). Cotton preliminary processing. Tashkent Mehnat.

Zikirov, M. C., Qosimova, S. F., & Qosimov, L. M. (2021). Direction of modern design activities. Asian Journal of Multidimensional Research (AJMR), 10(2), 11-18.

Turdiyev, H. E. (2024). Improving the efficiency of the technology of cleaning seed cotton from large impurities. Journal of Science-Innovative Research in Uzbekistan, 2(2), 372-379.

Turdiyev, H. E., Tursunaliyeva, D., & Hayitova, M. (2024). Improvement of the column grid of the vtm type fibre cleaner used in foreign technology. Journal of Science-Innovative Research in Uzbekistan, 2(2), 583-588.

M.A. Gapparova, M.E. Ruzmetov, T.O. Toychiyev, "Preliminary processing of natural fibres" study guide. Tashkent, TTESI, 2018.

Turdiyev, H. E. (2024). 2SB-10 model drum dryer improvement of the paddles in order to increase the level of cotton drying. Journal of Science-Innovative Research in Uzbekistan, 2(2), 503-507.

Rakhmanov, B., Razzakov, S., & Kosimov, L. (2023). The research on the influence of temperature on the properties of synthetic fibres for load-handling devices. In E3S Web of Conferences (Vol. 460, p. 10003). EDP Sciences.

Turdiyev, H. E., & Ogli, Y. A. K. (2024). To study the analysis of the operation technology, operational characteristics and equipment of the device that transports cotton by air. Journal of Science-Innovative Research in Uzbekistan, 2(2), 508-512.