DETERMINATION OF DIFFERENT MOISTURE CONTENT OF  SEEDED COTTON IN TOWER DRYING DRUM OF COTTON RAW  MATERIAL AND IMPROVEMENT OF TECHNOLOGY

H. E. Turdiyev; B.Asraqulova; M.Qodiraliyeva

Vol. 2 No. 4 (2024), Articles

Vol. 2 No. 4 (2024)

DETERMINATION OF DIFFERENT MOISTURE CONTENT OF SEEDED COTTON IN TOWER DRYING DRUM OF COTTON RAW MATERIAL AND IMPROVEMENT OF TECHNOLOGY

Articles

Published 2024-04-08

H. E. Turdiyev⁺⁻
B.Asraqulova⁺⁻
M.Qodiraliyeva⁺⁻

H. E. Turdiyev

Lecturer, Fergana Polytechnic Institute, Fergana, Uzbekistan

B.Asraqulova

Student, Fergana Polytechnic Institute, Fergana, Uzbekistan

M.Qodiraliyeva

Student, Fergana Polytechnic Institute, Fergana, Uzbekistan

PDF

DOI

Keywords

Saw drum, colosnik grill, air nozzle, dirt removal auger, brush

How to Cite

DETERMINATION OF DIFFERENT MOISTURE CONTENT OF SEEDED COTTON IN TOWER DRYING DRUM OF COTTON RAW MATERIAL AND IMPROVEMENT OF TECHNOLOGY. (2024). Journal of Science-Innovative Research in Uzbekistan, 2(4), 148-152. https://universalpublishings.com/index.php/jsiru/article/view/5111

Abstract

This study investigates methods to improve the determination of moisture content in seeded cotton within tower drying drums used for cotton raw material processing. Efficient moisture control is crucial for maintaining product quality and optimizing processing efficiency. By enhancing moisture measurement techniques and refining drying technology, this research aims to improve accuracy, reliability, and effectiveness in moisture content determination. Various strategies, including sensor integration, data analytics, and process optimization, will be explored to advance technology and enhance the performance of tower drying drums for seeded cotton

PDF

DOI

References

Babadjanov M.A. (2009). Technological process design. Textbook. T.:, Cholpon. 182 p.

M.T. Tillaev, "Technology and equipment of preliminary processing of cotton", methodical manual for performing laboratory work. T., "TTESI", 2015.

Zikirov, M. C., Qosimova, S. F., & Qosimov, L. M. (2021). Direction of modern design activities. Asian Journal of Multidimensional Research

(AJMR), 10(2), 11-18.

M.A. Gapparova, M.E. Ruzmetov, T.O. Toychiyev. (2018). Preliminary processing of natural fibers. Study guide. Tashkent, TTESI.

Turdiyev, H. E. (2024). Improving the efficiency of the technology of cleaning seed cotton from large impurities. Journal of Science-Innovative Research in Uzbekistan, 2(2), 372-379.

Zikriyoyev E.Z. (2002). Cotton preliminary processing. Tashkent Mehnat.

Turdiyev, H. E., & Ogli, Y. A. K. (2024). To study the analysis of the operation technology, operational characteristics and equipment of the device that transports cotton by air. Journal of Science-Innovative Research in Uzbekistan, 2(2), 508-512.

Turdiyev, H. E. (2024). 2SB-10 model drum dryer improvement of the paddles in order to increase the level of cotton drying. Journal of Science-Innovative Research in Uzbekistan, 2(2), 503-507.

Rakhmanov, B., Razzakov, S., & Kosimov, L. (2023). The research on the influence of temperature on the properties of synthetic fibres for load-handling devices. In E3S Web of Conferences (Vol. 460, p. 10003). EDP Sciences.

Turdiyev, H. E., Tursunaliyeva, D., & Hayitova, M. (2024). Improvement of the column grid of the vtm type fiber cleaner used in foreign

technology. Journal of Science-Innovative Research in Uzbekistan, 2(2), 583-588.