Keywords
How to Cite
Abstract
Metals may be present in long-staple seeded cotton falling into the roller gin. Metal impurities damage the equipment during operation. In order to prevent this, w place a piece of magnet in the equipment that catches metal compounds. The seeded cotton falls into the pile drum through the securing roller. There, it is cleaned of small impurities and enters the working chamber through a chute.References
Babadjanov M.A. (2009). Technological process design. Textbook. T.:, Cholpon. 182 p.
Zikriyoyev E.Z. (2002). Cotton preliminary processing. Tashkent Mehnat.
M.T. Tillaev, "Technology and equipment of preliminary processing of cotton", methodical manual for performing laboratory work. T., "TTESI", 2015.
M.A. Gapparova, M.E. Ruzmetov, T.O. Toychiyev. (2018). Preliminary processing of natural fibers. Study guide. Tashkent, TTESI.
Turdiyev, H. E. (2024). Improving the efficiency of the technology of cleaning seed cotton from large impurities. Journal of Science-Innovative Research in Uzbekistan, 2(2), 372-379.
Turdiyev, H. E., & Ogli, Y. A. K. (2024). To study the analysis of the operation technology, operational characteristics and equipment of the device that transports cotton by air. Journal of Science-Innovative Research in Uzbekistan, 2(2), 508-512.
Turdiyev, H. E., Tursunaliyeva, D., & Hayitova, M. (2024). Improvement of the column grid of the vtm type fiber cleaner used in foreign technology. Journal of Science-Innovative Research in Uzbekistan, 2(2), 583-588.
Turdiyev, H. E. (2024). 2SB-10 model drum dryer improvement of the paddles in order to increase the level of cotton drying. Journal of Science-Innovative Research in Uzbekistan, 2(2), 503-507.
Rakhmanov, B., Razzakov, S., & Kosimov, L. (2023). The research on the influence of temperature on the properties of synthetic fibres for load-handling devices. In E3S Web of Conferences (Vol. 460, p. 10003). EDP Sciences.
Zikirov, M. C., Qosimova, S. F., & Qosimov, L. M. (2021). Direction of modern design activities. Asian Journal of Multidimensional Research (AJMR), 10(2), 11-18
This work is licensed under a Creative Commons Attribution 4.0 International License.