Vol. 2 No. 4 (2024), Articles
Vol. 2 No. 4 (2024)

OPTIMIZATION OF RAW MATERIAL SHAFT INSTALLATION AND SPEED ENHANCEMENT IN DPZ CHAINSAW WORKING CHAMBERS

Articles
Published 2024-04-08
Surayyo Abdurahmonova
Student of the group 44-20 TTDIT, Fergana Polytechnic Institute, Fergana, Uzbekistan
Kumushkhan Kurolova
Student of the group 44-20 TTDIT, Fergana Polytechnic Institute, Fergana, Uzbekistan
Umida Ergasheva
Student of the group 44-20 TTDIT, Fergana Polytechnic Institute, Fergana, Uzbekistan
PDF
DOI

Keywords

DPZ sawed gin, raw material, raw material, seed, cotton with seed

How to Cite

OPTIMIZATION OF RAW MATERIAL SHAFT INSTALLATION AND SPEED ENHANCEMENT IN DPZ CHAINSAW WORKING CHAMBERS. (2024). Journal of Science-Innovative Research in Uzbekistan, 2(4), 124-130. https://universalpublishings.com/index.php/jsiru/article/view/5107
ACM ACS APA ABNT Chicago Harvard IEEE MLA Turabian Vancouver AMA

Download Citation

Endnote/Zotero/Mendeley (RIS) BibTeX

Abstract

This study focuses on optimizing the installation of the raw material shaft in the working chamber of the DPZ chainsaw and increasing its rotational speed to nhance processing efficiency. The raw material shaft is a critical component of the chainsaw, responsible for feeding raw materials into the cutting mechanism. By improving the installation process and boosting the rotational speed of the shaft, this research aims to reduce downtime, enhance throughput, and improve overall performance in wood processing operations. Through meticulous design modifications, precision installation techniques, and motor upgrades, the goal is to develop an optimized configuration of the raw material shaft that maximizes cutting speed and efficiency in the DPZ chainsaw
PDF
DOI

References

E. Zikriyoyev. (2002). Preliminary processing of cotton, Tashkent.

M. Omonov. (2008). Cotton preliminary processing spravochnik. Tashkent.

Decree of the President of the Republic of Uzbekistan dated 10.01.2023 No. 2.

G.J. Jabbarov. (1987). Technology of seed cotton processing. Teacher. Tashkent.

Turdiyev, H. E. (2024). Improving the efficiency of the technology of cleaning seed cotton from large impurities. Journal of Science-Innovative Research in Uzbekistan, 2(2), 372-379.

Rakhmanov, B., Razzakov, S., & Kosimov, L. (2023). The research on the influence of temperature on the properties of synthetic fibres for load-handling devices. In E3S Web of Conferences (Vol. 460, p. 10003). EDP Sciences.

Zikirov, M. C., Qosimova, S. F., & Qosimov, L. M. (2021). Direction of modern design activities. Asian Journal of Multidimensional Research

(AJMR), 10(2), 11-18.

Turdiyev, H. E., & Ogli, Y. A. K. (2024). To study the analysis of the operation technology, operational characteristics and equipment of the device that transports cotton by air. Journal of Science-Innovative Research in Uzbekistan, 2(2), 508-512.

Turdiyev, H. E., Tursunaliyeva, D., & Hayitova, M. (2024). Improvement of the column grid of the vtm type fibre cleaner used in foreign

technology. Journal of Science-Innovative Research in Uzbekistan, 2(2), 583-588.

Turdiyev, H. E. (2024). 2SB-10 model drum dryer improvement of the paddles in order to increase the level of cotton drying. Journal of Science-Innovative Research in Uzbekistan, 2(2), 503-507.

Babadjanov M.A. (2009). Technological process design" textbook, Tashkent, Cholpon.

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.