IMPROVING COLOSSAL GRID OF 5LP LINTING TECHNOLOGY PROSESSES AND INITIAL IMPROVEMENT

Z Kholiqova

Vol. 3 No. 6 (2025), Articles

Vol. 3 No. 6 (2025)

IMPROVING COLOSSAL GRID OF 5LP LINTING TECHNOLOGY PROSESSES AND INITIAL IMPROVEMENT

Articles

Published 2025-06-18

Z. Kholiqova⁺⁻

Z. Kholiqova

Lecturer, Fergana state of technical university, Fergana, Uzbekistan

PDF

DOI

Keywords

Seeds, grate, stirrer, saw shaft, seed comb, air blower.

How to Cite

IMPROVING COLOSSAL GRID OF 5LP LINTING TECHNOLOGY PROSESSES AND INITIAL IMPROVEMENT. (2025). Journal of Science-Innovative Research in Uzbekistan, 3(6), 337-341. https://universalpublishings.com/index.php/jsiru/article/view/12658

Abstract

Adjustment of the supply of seed to the linter is performed depending on the density of the seed mass in the working chamber. The performance of the linter on the seed is carried out by changing the length of the chain connecting the variator with the seed density lever in the working chamber and by changing the position of the load on the lever of the density lever.

PDF

DOI

References

1. Salimov, A., & Akhmatov, M. (2005). Preliminary Processing of Cotton. Training Manual. Tashkent: Knowledge Publishing.

2. Babadzhanov, M.A. (2009). Technological Process Design. Textbook. Tashkent: Cholpon.

3. Jabborov, G.J. (1987). Technology of Seed Cotton Processing. Tashkent: Teacher Publishing.

4. Salimov, O.A., Khusanova, S.A., Salimov, M., & Rahimjonov, A.R. (2022). Study of Factors Affecting the Quality of Raw Cotton During Storage and Processing. Central Asian Journal of Theoretical & Applied Sciences, 3(3), 40–46.

5. Salimov, A., Salimov, O., Khusanova, Sh., & Khakimov, I. (2020). The Problems of Natural Fiber and Textile Materials on Fire Resistance. SAARJ Journal Akademicia: An International Multidisciplinary Research Journal, April 2020 Issue.

6. Sarimsakov, O.Sh., & Khusanova, Sh.A. (2020). Improvement of the Process in Disassembling of Cotton Stack and Transferring the Cotton into Pneumotransport. International Journal of Advanced Science and Technology, 29(7), 10849–10857.

7. Ergashev, Y., Khusanova, S., & Axmadjonov, D. (2022). Analysis of the Fiber Quality of Cotton Varieties Grown by Region. Gospodarka i Innowacje, 21, 242–244.

8. Ahmedov, M.Kh., Tuychiev, T.O., Ismoilov, A.A., & Khusanova, S.A. (2021). Algorithm of the Estimation of the Moving the Raw Cotton on Surfaces of the Pallet of the Mechanism of the Presenting Ginning Machines. Scientific-Technical Journal, 4(3), 69–74.

9. Ergashev, Y., Khusanova, A.S., & Babayeva, M. (2020). Analysis of Dynamic Characteristics of Selective Technology of Sawing. Fergana Scientific-Technical Journal, Issue 1.

10. Sattorov, N., & Khusanova, S.A. (2020). Selective Technologies in Sawing. Intellectual Property Agency of the Republic of Uzbekistan, DGU08698.

11. Khusanova, A.S., & Toshmirzayev, Q. (2021). Selective Technologies in Sawing. Collection of Conference Materials, pp. 23–24.