METHODS TO IMPROVE PNEUMATIC TRANSPORT SYSTEM ELEMENTS AND REDUCED COTTONSEED DAMAGE
Keywords:
airflowAbstract
The enhancement of the transport components of the device that carries cotton by air is the subject of several scientific studies that are analyzed in this article.
According to an analysis, scientific studies are primarily concerned with preserving the quality of cotton that is transported, minimizing seed damage, lowering electricity usage, and minimizing the emission of dusty air into the atmosphere.
References
1. Саломова, М., Рахимов, Ф., & Қосимов, Х. (1992). Пневмотранспорт қурилмаси элементларини такомиллаштириш. Механика муаммолари. 2019й, 101-104.
2. Rahimov, F., Rajapova, N., & Salomova, M. (2019). R. Muradov Create a Device that can Remove Heavy Components from the Chassis Chamber International Journal Advanced Research Science, Engineering and Technology//Of ijarset, 6(7), 2350-0328.
3. Якубов, И. (2021). Саломова Машхура, Маматқулов Орифжон. Чигит шикастланишини камайтириш мақсадида сепаратор конструкциясини такомиллаштириш // Халқаро илмий-амалий конференсия материаллари тўплами, 11(23), p647-649.
4. Toshpo’latov Mansurbek, Komilov Shuxratjon Raximjon o’g’li, Salomova Mashhura Arabboy qizi, & Muradov Rustam Muradovich. (2024). PAXTA CHIGITINI TOZALASH QURILMALARINI ISHLASH TIZIMI TAXLILI. Новости образования: исследование в XXI веке, 2(18), 338–342. извлечено от http://nauchniyimpuls.ru/index.php/noiv/article/view/14695
5. Salomova, M., Salokhiddinova, M., & Muradov, R. (2023, June). How to increase the effect radius of the cotton transport process in a mobile device. In AIP Conference Proceedings (Vol. 2789, No. 1). AIP Publishing
6. Sharipjanovich, S. O., O’gli, Y. X. S., Numonjonovich, S. X., & Rustamjonovich, M. S. (2022, May 12). INVESTIGATION OF SEPARATION
OF USABLE FIBERS ADDED TO CONTAMINANTS DURING CLEANING
COTTON. https://bestpublication.org/index.php/ozf/article/view/256
7. Yo‘Ldashev Hasanboy Sulaymon O‘G‘Li, Inamova Maftuna Dedamirza Qizi, & Sarimsakov Olimjon Sharifjanovich (2023). Arra tishlaridan paxta tolasini yechib olish jarayoni parametrlarini ilmiy asoslash. Илм-фан ва инновацион ривожланиш / Наука и инновационное развитие, 6 (6), 84-95. doi: 10.36522/2181-9637-2023-6-9
8. Arra tishlaridan paxta tolasini ilib olish jarayonini matematik modelini ishlab chiqish. (2023). International Conference on Multidisciplinary Science, 1(5), 174-177. https://mjstjournal.com/index.php/icms/article/view/381
9. Sulaymonov Abror, Inamove Maftuna, Yuldashev Khasanboy. (2022). THEORETICAL STUDIES OF THE NATURE OF THE INTERACTION OF
COTTON SEEDS IN THE GAP BETWEEN THE AGITATOR BLADE AND THE SAW CYLINDER. EURASIAN JOURNAL OF ACADEMIC
RESEARCH, 2(11), 666–672. https://doi.org/10.5281/zenodo.7218857
10. Yuldashev, K., Sharipov, K., Najmitdinov, S., Inamova, M., & Ruzimatov, S. (2024). Modelling Cotton Fiber Doffing From Saw Teeth Based On A Mathematical Model. E3S Web of Conferences, 537, 08017. https://doi.org/10.1051/e3sconf/202453708017
11. Khasanboy, Y., Inamova, M., Qobilov, M., & Abduxaliqov, A. (2021, November 17). Effect Of Moisture Contenent In The Process Of Storing, Drying And Cleaning The Seed Cotton. https://www.orientalpublication.com/index.php/iscrc/article/view/189
12. Khasanboy, Y., Abduraximov, K., Inamova, M., & Mirgulshanov, K. (2021, November 17). Study Of The Process Of Cleaning Seedcotton.
https://orientalpublication.com/index.php/iscrc/article/view/191
13. Azimov, S. S., Tursunov, I. T., & Yuldashev, K. S. (2022). DEVELOPMENT OF THE DESIGN OF A FEEDER OF VIBRATION ACTION FOR SUPPLYING COTTON SEEDS TO LINTER MACHINES Proceeding IX International Conference «Industrial Technologies and Engineering» ICITE–2022, Volume IV M. Auezov South Kazakhstan University, Shymkent, Kazakhstan December, 09-10.
14. Olimjon Sarimsakov, Khasanboy Yuldashev, Sherzod Tuxtaev, Bekzod Urinboyev, Utkirbek Xoshimov; Methodology for performing aerodynamic measurements in cleaning seed cotton. AIP Conf. Proc. 23 June 2023; 2789 (1):
040128. https://doi.org/10.1063/5.0145700
15. Yuldashev, K., Sarimsakov, Prof., & Kayumov, Prof. (2023, December 27).
Increasing the efficiency of fiber cleaning by improving the process of removing cotton fiber from the teeth of the saw.
https://mjstjournal.com/index.php/mjst/article/view/585.
https://mjstjournal.com/index.php/mjst/article/view/585
16. Madumarov , S. ., Jurayev , Y. ., & Yuldashev, K. . (2022). GENERAL INFORMATION ON THE IMPORTANCE OF FEEDSTOCK DENSITY AND
SPEED IN THE FIBER SEPARATION PROCESS. Академические
исследования в современной науке, 1(16), 57–61. извлечено от
https://www.econferences.ru/index.php/arims/article/view/1485
17. Jurayev , Y. ., Yuldashev , K. ., & Tuhktaev , S. . (2022). INVESTIGATION OF FIBER LOSS IN IMPURITIES FROM THE SS-15A
SEPARATOR. Евразийский журнал академических исследований, 2(11),
425–431. извлечено от https://www.in-
academy.uz/index.php/ejar/article/view/4776
18. Sarimsakov Olimjon Sharipjanovich, Kurbanov Dilmurod Maripjanovich, Yo'ldashev Xasanboy Sulaymon O'gli, & Jurayev Yo'ldashxon Yunusxon O'g'li. (2022). INVESTIGATION OF LOSING FIBER DURING CLEANING
COTTON. https://doi.org/10.5281/zenodo.6559924
19. Yo‘Ldashev Xasanboy Sulaymon O‘G‘Li, Sarimsakov Olimjon Sharifjanovich, Ergashev Sharibboy To‘Lanovich, & Sharipov Xayrullo No‘Monjanovich (2024). PAXTA TOLASINI ARRALI TOLA AJRATGICH ARRASI
TISHLARIDAN YECHIB OLISH JARAYONINI TAKOMILLASHTIRISH YO‘LI BILAN TOLANI TOZALASH SAMARADORLIGINI OSHIRISH
HAMDA ASOSLASH. Механика и технология, 2 (15), 160-164. 20. Yo‘Ldashev Xasanboy Sulaymon O‘G‘Li, Sarimsakov Olimjon Sharifjanovich, & Ergashev Sharibboy Tulanovich (2024). PAXTA TOLASI BILAN HAVO ARALASHMASI OQIMI HARAKATINI MODELLASHTIRISH. Al- Farg’oniy avlodlari, (3), 139-144. doi: 10.5281/zenodo.13954931 21. Yo'ldashev Xasanboy Sulaymon O'g'li, Inamova Maftuna Dedamirza Qizi, Mahmudova Yulduzxon Qutbiddin qizi, & Sarimsakov Olimjon Sharipjanovich. (2023). Arra tishlaridan paxta tolasini echib olish jarayoni parametrlarini asoslash. JOURNAL OF UNIVERSAL SCIENCE RESEARCH, 1(11), 665–
671. https://doi.org/10.5281/zenodo.10250904
22. Arra tishlaridan paxta tolasini ilib olish jarayonini matematik modelini ishlab
chiqish. (2023). International Conference on Multidisciplinary Science, 1(5),
174-177. http://mjstjournal.com/index.php/icms/article/view/381
23. Исаев, Ш., & Инамова M. (2023). ЧИГИТ САРАЛАШ ҚУРИЛМАСИДА ФРАКЦИЯЛАРГА АЖРАТИШ ТАДҚИҚОТЛАР ТАХЛИЛИ. Talqin Va Tadqiqotlar, 1(7). извлечено от
http://talqinvatadqiqotlar.uz/index.php/tvt/article/view/336
24. Usmanovich, S. A., Raximjon o’g’li, K. S., & Maftuna, I. (2023). CHIGIT SARALAGICHLAR BO’YICHA O’TKAZILGAN TAXLILLAR
NATIJALARI. O'ZBEKISTONDA FANLARARO INNOVATSIYALAR VA
ILMIY TADQIQOTLAR JURNALI, 2(24), 190-193.
25. Шарипов К., Ахмедходжаев К., Тоджибоев М., Саримсаков О. (2020) Математическая модель движения семян на ребре вогнутого профиля.
Машиностроение, 12, 216-227. https://doi.org/10.4236/eng.2020.123017
26. Sharipov, K., Akhmetxodjayev, K., & Tadjibayev, M. (2019). The mathematical model of seed movement on a concave profile rib of saw jin stand. Scientific and technical journal of Namangan institute of engineering and technology, 4, 19- 29.
27. Ахмедходжаев, К. Т., Таджибаев, М. А., Шарипов, К. Н. М., Джурамирза, А. К., и Абдураксимов, К. К. (2023). Изучение семян хлопчатника как технологического материала. Машиностроение, 15(11), 782-791. 28. Inamova, M., Rejabboyev, S., & Abduqodirov, K. (2024). SAW BLADE DENSITY, SPEED AND COMPOSITION FROM CHANGES IN THE SPEED
OF THE SAW CYLINDER IN A SAWING MACHINE. Science and innovation, 3(A9), 97-100. 29. Isayev, S., Mamadaliyev, M., Muxsinov, I., Maftuna, I., & Sohibjon, E. (2023).
Practical and theoretical analysis of the results obtained in the process of cleaning cotton from impurities. Scientific and Technical Journal of Namangan Institute of Engineering and Technology, 8(2), 67-73. 30. Sarimsaqov, O. S., Inamova, M. D., & Ortiqova, K. I. (2023). URUGLIK CHIGIT TOLASINI ARRA TISHLARIDAN YECHIB OLISH
JARAYONLARI SAMARADORLIGINI OSHIRISH: URUGLIK CHIGIT
TOLASINI ARRA TISHLARIDAN YECHIB OLISH JARAYONLARI
SAMARADORLIGINI OSHIRISH
