Abstract
Jin mashinasini ishlatish orqali to’g’ri yig’ilgan arrali silindr, kolosnikli panjaralar va yaxshi sozlangan texnologik tirqishlarga ega bo’lgan mashinalar uzoq vaqt to’xtatmay ishlatish hamda yuqori sifatli paxta mahsulotini olish.
References
Muradov R. va boshqalar. Jin mashinasi konstruksiyasini takomillashtirish yo’llari Monografiya. “Namangan” nashriyoti. -2016, 124 bet .
Omonov F.B. Paxtani dastlabki ishlash bo'yicha spravochnik (ma’lumotnoma) nashriyot. Toshkent 2008.
Wang, G.H. and Li, Y.X. (2022) Development of New Ductile Iron with Super-High Thermal Conductivity and Elongation. Journal of Iron and Steel Research International, 29, 462-473. https://doi.org/10.1007/s42243-021-00581-7
Hassan, M. (2017) Characterization of Face Sheet/Core Debonding Strength in Sandwiched Medium Density Fiberboard. Materials Sciences and Applications, 8, 673-684. https://doi.org/10.4236/msa.2017.89048
Ning, B., Wu, H.B., Niu, G., et al. (2022) Cold Compression Deformation Method for reducing Residual Stress and Uniformizing Micro-Property in Ferrite Steel. Journal of Iron and Steel Research International, 29, 503-511. https://doi.org/10.1007/s42243-021-00563-9
Azizov, S.M. and Axmedhodjaev, X.T. (2016) The Optimal Modeling of an Angular Position of Saw Cylinders in Single-Chamber Two Cylinders Gin. American Journal of Mechanical and Industrial Engineering, 1, 103-106.
https://doi:10.11648/j.ajmie.20160103.2
Wang, Y.D., Zhang, L.F., Yang, W., et al. (2022) Effect of Nozzle Type on Fluid Flow, Solidification, and Solute Transport in Mold with Mold Electromagnetic Stirring. Journal of Iron and Steel Research International, 29, 237-246. https://doi.org/10.1007/s42243-021-00577-3
Azizov, S.M. and Axmedhodjaev, H. (2015) Theoretical Analysis of Gin Cylinder for Simulating Dual Saw Cylinder Chamber Gin for Increasing Wear Proof, Energy Efficient, Saving Resources. World Journal of Engineering and Technology, 3, 91-99.
Azizov, S., Ibrohimov, M., Uzoqov, F. and Mirzakarimov, M. (2021) The Modelling and Introductions of New Type Ribs of Lattice of the Two Cylinder of Gin. E3S Web of Conferences, 273, Article ID: 07020. https://doi.org/10.1051/e3sconf/202127307020
Jiang, D.B., Zhang, L.F. and Wang, Y.D. (2022) Effect of Mold Electromagnetic Stirring on Solidification Structure and Solute Segregation in Continuous Casting Bloom. Journal of Iron and Steel Research International, 29, 124-131. https://doi.org/10.1007/s42243-021-00702-2
Briseno, J. and Casanova-del-Angel, F. (2021) Fracture Mechanics on Aluminum Specimens. World Journal of Mechanics, 11, 237-257. https://doi.org/10.4236/wjm.2021.1112016
Mamatovich, A.S. and Abdusamat, K. (2011) Definition of Increasing the Fibre Capturing Surface of Saw Teeth of Cotton Ginning Machine through Mathematic Modelling. World Journal of Mechanics, 1, 122-126.
https://doi.org/10.4236/wjm.2011.13017
Azizov, S., Uzoqov, F., Mirzakarimov, M. and Usmanov, O. (2021) Analysis of Namangan 77 Cotton in Production Line with Different Saw Gins for Short Fiber Yield. E3S Web of Conferences, 273, Article ID: 07021.
This work is licensed under a Creative Commons Attribution 4.0 International License.